Blog
As an important component of optical communication systems, the quality of fiber optic jumpers' connectors determines the transmission quality of the network. The function of the connector is to precisely connect the two separated fiber end faces, so that the optical energy output by the transmitting fiber can be coupled to the receiving fiber to the maximum extent. Optical fiber connectors i...
With the rapid development of the Internet, traffic has increased rapidly, and data centers have higher requirements for speed and bandwidth. In the 40G/100G data center cabling scheme, parallel transmission technology has made multi fiber MPO patch cord widely used. The commonly known MPO patch cord is actually composed of OM3/OM4 multimode fiber patch cords or single mode fiber patch cords with ...
The current branch deployment of ports has become one of the popular ways to build networks, and has driven the development of the parallel optical module market. At present, the commonly used parallel modules are 40G QSFP+ SR4 and 100G QSFP28 SR4, which can be converted into four 10G/25G links for link. This parallel optical module is conducive to multi-link applications, such as the constru...
In this article, ETU-LINK will introduce the 100G QSFP28 and 25G SFP28 cost-effective port branch connection solutions. The following will analyze and compare from the two aspects of saving space and cost. First of all, let's talk about why the cost performance is high, we can judge by comparing the cost. We can assume a scenario with an 8-slot chassis, which is fully equipped with 36 QSFP28 ports...
When it comes to data center 10G network interconnection solutions, we have to mention 10G AOC active optical cables and 10G DAC direct attach cables. Which is more suitable for data centers? ETU-LINK will analyze it for everyone in this blog. Let's talk about ETU-LINK 10G AOC active optical cable first. It uses high-performance fiber core, good bending resistance, and is not sensitive to ben...
In generic cabling, MTP / MPO components have strong flexibility, which can realize 72 core optical fiber cabling at most, and 12 core optical fiber distribution box is mainly used for 40G / 100G data center. In 40G data center, 12 core optical fiber distribution box can be used to connect 40G QSFP + SR4 optical module and 10G SFP+ SR optical module; In 100G data center, 12 core optical ...
The role of optical modules in optical communication networks is photoelectric conversion, so what optical devices are mainly composed of optical modules? ETU-LINK will reveal the answer for everyone. First of all, the two most important parts of the optical transceiver are the optical transmitting assembly (TOSA) and the optical receiving assembly (ROSA). Among them, the optic...
10G SFP+ optical switch has been widely used in data centers and enterprises. In this blog, ETU-LINK lists the connection schemes that accessible 10G SFP+ ports? And under what circumstances is it more appropriate to choose which one. Firstly, if the transmission distance is relatively close, we can consider using ETU 10G DAC cables for transmission. The length specifications of DACs on the market...
This blog ETU-LINK will show you how to identify the wavelength of CWDM optical module through the color of the pull ring. We all know that CWDM has a total of 12 wavelengths, with a full band range of 1270-1610nm, with each wavelength interval of 20nm. The industry divides the entire band into front wave and back wave, with the front wave band of 1270-1450nm and the back wave band of 1470-16...
The RG-S6920-4C switch is a new generation of high-performance, high-density card-type switches launched by Ruijie Networks for the development trend of AI and other applications.The RG-S6920-4C switch cooperates with the RGS6510 and RG-S6250 series TOR switches to meet the full three-layer network architecture design requirements of Spine-Leaf. The RG-S6920-4C switch is configured with 32 100G QS...
With the continuous surge of traffic, major operators and data centers began to upgrade the network architecture economically, smoothly and reliably. At present, there are two 100G migration paths, namely 10G to 40G to 100G and 25G to 100G. Next, ETU-LINK will introduce the wiring schemes of these two paths. 1. 10G wiring The 10 Gigabit Ethernet technology defi...
We all know that the multi-mode 40G SR4 optical module adopts 4-way 10G parallel technology and MPO interface, and can use MPO-LC multi-mode OM3 fiber jumper and 10G SR for access。So are there any 40G optical modules that can be connected to single-mode 10G LR optical modules?In this article, ETU-LINK will introduce the next 40G optical module that can be interconnected with 10G LR optical module ...
Categories
New Blog
Tags
© Copyright: 2024 ETU-Link Technology CO ., LTD All Rights Reserved.
IPv6 network supported
Friendly Links:
易天官网