Blog
Why don’t data centers use multi-mode OM2 fiber anymore? In this article, ETU-Link will reveal the answer for you. Firstly, OM2 is mainly a traditional 50/125 micron graded index multi-mode fiber. OM2 fiber is based on LED light source in terms of standard and design, and has low bandwidth requirements. It cooperates with LED to transmit 1000Mbit/s and lower rates. OM2 will withdraw from the data ...
Now Gigabit Ethernet has been popularized in a large area, and Gigabit Ethernet switches are also widely used in scenarios such as enterprise networks and optical access networks. Gigabit Ethernet has two types of ports, namely RJ45 and SFP ports. These two ports can support the highest transmission rate of Gigabit, and can also be backward compatible with the transmission rate of 10/100M. ...
According to the customer's feedback, how should we analyze and solve the issue that the switch and optical module are incompatible or cannot be used? In this article, ETU-LINK proposes the following solutions to this issue. Optical fiber patch cord collocation problem If the optical module does not respond to being inserted into the network cord of the switch, check whether the optical fib...
With the rapid development of the communication industry and data centers at home and abroad, the demand for optical modules has increased sharply. In addition to the original optical modules of equipment manufacturers, there are also third-party optical module manufacturers. So how should we choose optical modules? In this article, ETU-LINK will introduce to you what factors we need to consider w...
In order to be more widely compatible with more branded devices, ETU-Link has newly introduced the Aruba 2930F JL254A switch, 2930F supports built-in 1GbE or 10GbE uplink, PoE+, access OSPF routing, tunnel node, RIP routing and IPv6, no software license required.The Aruba 2930F switch series provides a convenient and cost-effective access switch solution that can be set up quickly with zero-touch ...
From the perspective of the development trend of data centers, the trend of "cloud" and digitalization of enterprises is irreversible. The ICT industry such as cloud computing, big data and artificial intelligence has an increasingly large demand for data centers. The bandwidth demand of data centers is growing at a rapid rate of 25% to 35% every year, and the bandwidth capacity is also doubling. ...
In the construction of 5G network, optical module is the basic building unit of 5G network, which accounts for a large proportion of network construction cost and is the key element of 5G low cost and wide coverage. The 5G network bearer network is divided into fronthaul, midhaul, and backhaul. The fronthaul refers to the connection between the active antenna processing unit (AAU) and the distribu...
Juniper EX4650 Ethernet switch provides Layer 2 and Layer 3 connectivity of 2 Tbps to networked devices such as security routers, servers, and other switches. The EX4650 is equipped with 48 line speed 10GbE/25GbE small pluggable optical module (SFP/SFP+/SFP28) ports and 8 line speed 40GbE/100GbE quad core SFP+optical module (QSFP+/QSFP28) ports in a compact 1U platform, providing flexible support ...
Optical module is a connection module for photoelectric conversion, in which the sender converts electrical signals into optical signals, and the receiver converts optical signals into electrical signals after transmission through optical fibers. The optical module is composed of optoelectronic devices, functional circuits and optical interfaces. Optoelectronic devices include transmitting an...
Raisecom ISCOM3000X series 10-Gigabit switch is equipped with 1U standard chassis, small size, large capacity, 1.28T switching capacity, L2/L3 full line speed forwarding; 48 10 Gbit/s SFP+ downstream ports, four or six 40 Gbit/s QSFP+ upstream ports, QSFP+ ports can be used as four 10GE SFP+ ports, providing flexible networking capabilities and meeting the requirement for high-density access to 10...
In this article, ETU-LINK will analyze common problems related to 40G QSFP+ optical modules, 40G QSFP+ AOC active optical cables, and 40G QSFP+ DAC high-speed cables. Q1:Can a 40G optical module be connected with a 10G optical module? A1: Not all 40G optical modules can be connected to 10G optical modules, only 4*10G parallel transmission optical modules can be connected to 10G optical modules, fo...
In 1.25G and 10G optical modules, BiDi single-fiber and dual-fiber optical modules are transmitted by single-mode jumpers. Today, ETU-LINK will introduce a 100G BiDi single-fiber bidirectional optical module transmitted by multi-mode optical fibers. It adopts double LC fiber interface, uses multi-mode fiber for transmission up to 150 meters, working wavelength is 850nm, 950nm, modulation technolog...
Categories
New Blog
Tags
© Copyright: 2024 ETU-Link Technology CO ., LTD All Rights Reserved.
IPv6 network supported
Friendly Links:
易天官网