Optical Transceiver
Blog
Home Blog

Blog

  • Market depth analysis of 100G optical module
    Market depth analysis of 100G optical module
    • April 14. 2021

    With the mature development of 100G technology and the advent of 100G products, the deployment of large enterprise network and data center is evolving towards 100G. At present, 100G optical modules on the market include CFP, CFP2, CFP4, QSFP28 and CPAK. The sizes of 100G optical modules in different packages are different. Among them, the 100G optical module in QSFP28 package has the smallest...

  • What is the FEC function of 100G optical module?
    What is the FEC function of 100G optical module?
    • April 10. 2021

    Two important development trends of optical modules are to increase the transmission rate and extend the transmission distance. However, as the transmission rate increases, the signal transmission distance will be limited by many factors, such as chromatic dispersion, nonlinear effects, and polarization mode dispersion. These factors will limit the increase in transmission rate and trans...

  • Hewlett-Packard HP optical module model list
    Hewlett-Packard HP optical module model list
    • April 07. 2021

    As a switch brand equipment manufacturer, HP's equipment supports a variety of optical modules with different specifications. Users can choose the appropriate optical module according to their needs. Common optical modules are 100G QSFP28, 40G QSFP+, 25G SFP28, 10G SFP+ and 1.25G SFP etc. Below, ETU-LINK will give you a list of some commonly used HP optical module models. HP 1.25G SFP dual fiber s...

  • H3C router optical module solution
    H3C router optical module solution
    • April 02. 2021

    A router is a hardware device that connects two or more networks. It acts as a gateway between networks. It is a dedicated intelligent network device that reads the address in each data packet and then decides how to transmit it. Routers can be divided into backbone routers (core routers), enterprise-level routers, and access-level routers.   Generally, backbone routers have multiple optical ...

  • 400G optical module QSFP-DD package type introduction
    400G optical module QSFP-DD package type introduction
    • March 30. 2021

    Since 2019, 400G has become a hot topic in the optical communications industry. Several leading optical module manufacturers in the world have launched their own 400G optical modules and most of them have adopted QSFP-DD packages. As early as March 21, 2016, the QSFP-DD MSA team began to plan to develop the QSFP-DD high-speed interface, and experienced the resolution of a series of issues suc...

  • The difference between SFP, SFP+, SFP28, QSFP+ and QSFP28
    The difference between SFP, SFP+, SFP28, QSFP+ and QSFP28
    • March 26. 2021

    SFP, SFP+, SFP28, QSFP+ and QSFP28 are the packaging types of optical modules. These hot-swappable optical modules can be used to connect network switches and other network devices (such as servers, etc.) for data transmission. Before clarifying the difference between these package types, you need to understand what the SFP, SFP+, SFP28, QSFP and QSFP28 packages are. Next ETU-LINK w...

  • What are the differences between copper module and optical module?
    What are the differences between copper module and optical module?
    • March 23. 2021

    Before explaining the difference between the copper module and optical module, ETU-LINK takes you to know what the copper module and the optical module are. In fact, the copper module is a module that converts the optical port into the electrical port. Its function is to convert the optical signal into the electrical signal. Its interface type is RJ45.   The copper module has the charact...

  • 25G Ethernet may become the new trend of network in the future
    25G Ethernet may become the new trend of network in the future
    • March 20. 2021

    With the increasing demand of data center for bandwidth, the network rate is developing towards a higher rate, and there is bound to be the need for network upgrading. There are two upgrade paths for the network from 10G to 100G, namely 10G-25G-100G and 10G-40G-100G. End users seem to prefer 25G. Why? ETU-LINK will tell you.   All this can be said from the rise of 25 Ethernet. Data center TOR...

  • Introduction of 50G SFP56 SR Optical Module
    Introduction of 50G SFP56 SR Optical Module
    • March 18. 2021

    The 50G SFP56 SR optical module is an optical module with a transmission distance of 100m and a maximum rate of 53.125Gbps. The transmission distance can be up to 70m or 100m through OM3 or OM4 multimode optical fiber. It is widely used in 50GBASE-SR Ethernet links.     ETU-LINK's 50G SFP56 SR optical module uses PAM4 high-order modulation technology, which can transmit twice the am...

  • How to identify the quality of optical module
    How to identify the quality of optical module
    • March 16. 2021

    A high-quality optical module can ensure the flexible operation of high-density optical network, and provide convenience for subsequent management and expansion. So how should we judge the quality of optical module? Next, ETU-LINK will give you some judgment indicators.     The optical module shall comply with MSA multi-source protocol, and the manufacturer shall pass CE, ROHS, FCC ...

  • How to choose professional optical module manufacturers?
    How to choose professional optical module manufacturers?
    • March 12. 2021

    In the optical network solution, the unit cost of optical module as an accessory of switch is not as high as that of switch, but if the switch ports are full of optical modules, especially the original optical modules provided by equipment suppliers such as Cisco and Huawei, the total cost will be very high. Therefore, in order to reduce the total cost, many users will choose the third-party ...

  • What are the advantages and uses of armored fiber optic patch cords?
    What are the advantages and uses of armored fiber optic patch cords?
    • March 09. 2021

    Armored patch cord is a new type of optical fiber patch cord designed with a layer of stainless steel sleeve to protect the optical fiber. It has the advantages and functions of standard optical fiber patch cord, but at the same time has the durability of armor. The following ETU-LINK will give you a detailed introduction to the advantages, types and uses of under-armored fiber optic patch co...

© Copyright: 2024 ETU-Link Technology CO ., LTD All Rights Reserved.

IPv6 network supported

Friendly Links:

易天官网
top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #