Optical Transceiver
Blog
Home Blog

Blog

  • Introduction of 100M single-mode SFP BIDI SC connector optical module
    Introduction of 100M single-mode SFP BIDI SC connector optical module
    • June 19. 2021

    In this blog, ETU-LINK will focus on introducing the type and transmission distance of the 100M single-mode SFP BIDI SC connector optical module. This series of optical modules can not only support 3km, 10km, 20km, 40km, 80km and other transmission distances, but also have commercial (0℃-70℃) and industrial  (-40℃-85℃) optional temperature ranges. In order to facilitate you to understand this...

  • What are the types of Gigabit optical modules
    What are the types of Gigabit optical modules
    • June 17. 2021

    Gigabyte optical module has been a very mature series of products, the common transmission rate is 1.25G, 2.5G, etc., and the package type is SFP. There are many models of gigabit optical modules. Next ETU link will give you a detailed introduction to the types of gigabit optical module.   Gigabyte optical modules can be divided into two categories, namely, single fiber and dual fib...

  • Introduction of 40G BiDi QSFP+ dual fiber bidirectional optical module
    Introduction of 40G BiDi QSFP+ dual fiber bidirectional optical module
    • June 15. 2021

    In 40G short-distance optical network transmission, the conventional optical module solution is to use QSFP-40G-SR4 optical module and 12-core MPO multi-mode OM3 fiber patch cord. Although this solution can realize the upgrade of 10G network to 40G network, it uses MPO branch jumpers to connect 10G equipment and 40G equipment are obviously too expensive, so the industry has given a new optica...

  • Introduction of 40G QSFP+ LX4 optical module
    Introduction of 40G QSFP+ LX4 optical module
    • June 11. 2021

    With the increasing network bandwidth, many data centers have upgraded their 10G network to 40G. There are many solutions for 40G optical modules, such as 40G SR4 and 40G LR4. Today, etu-link introduces an optical module suitable for upgrading 40G network on the basis of 10G network wiring. It is 40G QSFP+ LX4 optical module. Different from other 40G QSFP+ optical modules, it can use either multim...

  • Introduction of 16G FC DWDM SFP+ series optical module
    Introduction of 16G FC DWDM SFP+ series optical module
    • June 08. 2021

    The Fibre Channel protocol was formulated by the X3T11 team of ANSI in 1988. It has the characteristics of high bandwidth, multi-media, and long-distance transmission. It can realize the transmission of large data files between storage, server and client nodes. In this article, ETU-LINK will focus on introducing the 16G FC DWDM SFP+ series optical modules for 16G Fibre Channel networks. ...

  • What is the use of CDR clock data recovery in optical modules?
    What is the use of CDR clock data recovery in optical modules?
    • June 04. 2021

    The CDR clock data recovery function plays a vital role in the signal transmission process of the optical module. Today, ETU-LINK will introduce to you what exactly is CDR clock data recovery.   The full name of CDR is clock and data recovery, which can be simply understood as: after the optical signal is converted into an electrical signal, the receiver performs electrical domain shaping and...

  • What is the use of the FEF function on the fiber media converter?
    What is the use of the FEF function on the fiber media converter?
    • June 01. 2021

    Fiber media converters are usually used in pairs to extend the transmission distance of copper cabling systems. But in the process of using, if one side of the link fails, the other side of the media converter will continue to work, and will not send an error report to the administrator. In this case, fiber media converter with FEF function can perfectly solve this problem. Next, we will introduce...

  • Introduction of 10 Gigabit SFP+ copper module and matters needing attention in use
    Introduction of 10 Gigabit SFP+ copper module and matters needing attention in use
    • May 29. 2021

    The 10 Gigabit copper module adopts hot pluggable SFP+ package, which can be divided into multi rate and single rate. The multi rate adaptive supports 1G to 10G transmission rate, and the single rate only supports 10G transmission rate. The interface type of 10 Gigabit copper module is RJ45. Its port can support both shielded twisted pair and unshielded twisted pair. It is mainly used in switches,...

  • The difference between fibre channel optical module and Ethernet optical module
    The difference between fibre channel optical module and Ethernet optical module
    • May 28. 2021

    Today, we will learn about optical fiber channel module, Ethernet optical module, and what is the difference between them? First of all, let's understand what fibre channel optical module is. It follows the fibre channel standard and is mainly used in the data center fibre channel storage network link. Its transmission rate can support 1-128Gbps at present. Common packages include SFP, SFP+, ...

  • The difference between switches and routers and optical module collocation solutions
    The difference between switches and routers and optical module collocation solutions
    • May 25. 2021

    We all know that a switch is a network device used to forward electrical (optical) signals, while a router is a hardware device that connects two or more networks. It acts as a gateway between networks and reads the data in each packet. The address then determines how to transmit the dedicated intelligent network device. Next, ETU-LINK will give you a detailed introduction to the differences ...

  • The market scale of optical modules will continue to increase, and domestic manufacturers will develop rapidly
    The market scale of optical modules will continue to increase, and domestic manufacturers will develop rapidly
    • May 22. 2021

    Driven by the construction of 5G base stations, cloud computing, and large-scale data centers in recent years, the market size of optical modules has increased accordingly. Although the optical module industry is developing rapidly at this stage and gradually becoming mature, from the perspective of the entire industry chain, its upstream optical components and chips still rely heavily on for...

  • The difference between multimode fiber OM3-150 and OM3-300
    The difference between multimode fiber OM3-150 and OM3-300
    • May 21. 2021

    The OM3 patch cord is a 10-Gigabit multi-mode patch cord. The multi-mode fiber uses light-emitting diodes as the light source, allowing multiple beams of light to propagate in the fiber at the same time, thereby forming a mode dispersion. Mode dispersion technology limits the bandwidth and distance of multimode fiber. Therefore, the core wire of multimode fiber is thick, the transmission speed is ...

© Copyright: 2024 ETU-Link Technology CO ., LTD All Rights Reserved.

IPv6 network supported

Friendly Links:

易天官网
top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #