Blog
In this article, ETU-LINK will analyze common problems related to 40G QSFP+ optical modules, 40G QSFP+ AOC active optical cables, and 40G QSFP+ DAC high-speed cables. Q1:Can a 40G optical module be connected with a 10G optical module? A1: Not all 40G optical modules can be connected to 10G optical modules, only 4*10G parallel transmission optical modules can be connected to 10G optical modules, fo...
In 1.25G and 10G optical modules, BiDi single-fiber and dual-fiber optical modules are transmitted by single-mode jumpers. Today, ETU-LINK will introduce a 100G BiDi single-fiber bidirectional optical module transmitted by multi-mode optical fibers. It adopts double LC fiber interface, uses multi-mode fiber for transmission up to 150 meters, working wavelength is 850nm, 950nm, modulation technolog...
As the market has higher and higher requirements for data transmission rates, higher-speed optical modules are also born. At present, in the high-speed optical module market, 100G optical modules are the mainstream products in the optical communication market. Next, ETU-LINK will introduce the 100G QSFP28 SR4 optical module to you. 100G QSFP28 SR4 Optical Module Introduction The 100G QSFP28 SR4 op...
At present, high-speed optical fiber transmission has been widely used in various backbone networks, and Ethernet Passive Optical Network (EPON) has become the preferred solution of relevant operators because of its low cost and time-sharing ability to provide users with high-performance access. With the accelerated deployment of 1Gbps fiber-to-the-home technology in the access network, telecom op...
At present, 4G Long-Term Evolution (LTE) base stations mainly use 10G optical modules, while 5G network deployment, especially in front-end transmission, 25G optical modules have become the first choice. As the fifth generation of mobile communication technology, the advent of the 5G era has brought the 25G optical module market to a new peak of development. The 4G network is ma...
ETU-LINK will introduce to you what is 10G SFP+ DWDM optical module and its advantages. The traditional optical fiber communication system is transmits one optical signal in one optical fiber. This method actually only uses a part of the optical fiber bandwidth. In order to make full use of the huge bandwidth resources of the optical fiber and increase the transmission capacity of the ...
With the development of optical communication technology, the market size of the optical module has continued to increase, and the 400G QSFP-DD packaging has become one of the most popular optical modules of large-scale data centers with the advantages of low power consumption, small volume, and high rate. At present, the types of 400G QSFP-DD optical modules on the market include 400G SR8, 400G D...
In this blog, ETU-LINK will explain the development direction of optical interconnection of data center in the future from three aspects: geographical location distribution, bandwidth demand and optical module of data center. The construction of data center needs to occupy a relatively large land area, and the current price of land remains high, especially in some more developed cities, so the int...
High speed cable DAC is used for the connection of short distance network devices, such as server, switches,storage and so on. It is a low cost measure of network devices connection. So far there are common DAC cables including 10G SFP+ to 10G SFP+ DAC cable, 25G SFP28 to 25G SFP28 DAC cable, 40G QSFP+ to 40G QSFP+ DAC cable, 40G QSFP+ to 4x SFP+ DAC cable, 100G to 100G QSFP28 DAC c...
At present, data center traffic is increasing exponentially and network bandwidth is also being upgraded, which brings great development opportunities for high-speed optical modules. ETU-link will talk about the four requirements for optical modules in the next generation data center. 1. High speed, improve bandwidth capability The switching capacity of switching chips almost doubles eve...
In this blog, ETU-LINK will talk about 10G DWDM Tunable module and its differences from ordinary DWDM optical module. The wavelength of 10G conventional SFP+ DWDM optical module is fixed, while 10G SFP+ DWDM Tunable optical module can be configured to output different DWDM wavelengths. The wavelength tunable optical module has the characteristics of flexible...
The RG-S6120 series switches are Ruijie Networks multi-service 10 Gigabit switches for next-generation converged networks. It integrates rich campus and data center features. This series of switches adopts advanced hardware architecture design and is equipped with Ruijie Networks' new modular operation. The system provides faster hardware processing performance and more convenient operation and us...
Categories
New Blog
Tags
© Copyright: 2025 ETU-Link Technology CO ., LTD All Rights Reserved.
IPv6 network supported
Friendly Links:
易天官网