In today's Internet era, both enterprise network deployment and data center construction are inseparable from optical transceivers and switches. Optical transceivers are mainly used to convert electrical and optical signals, while switches are used to forward photoelectric signals. Among many optical transceivers, the SFP+ optical transceiver is one of the most widely used optical transceivers. Wh...
The QSFP-40/100-SRBD is a dual-rate bidirectional (BiDi) optical module. It features 40G and 100G transmission rates and dual-fiber LC interface type. It can easily help customers upgrade from 10G to 40G/100G networks using existing 10G network duplex multimode fiber architecture. In the following, ETU-LINK will introduce the relevant parameters of the QSFP-40/100-SRBD optical module and the ...
In this blog, ETU-Link will introduce what the fiber optic adapter is. And common types of fiber optic adapters. Fiber optic adapters, also called flanges, are components that connect fiber-to-fiber or fiber-to-device. They are widely used in telecommunication networks, cable television networks, subscriber loop systems, and optical fiber link connections in regional networks. T...
In this blog, ETU-Link will introduce OM5 optical fiber patch cord. In order to distinguish different optical fiber patch cord, different colors outer sheath are used.For non-military purposes, single mode optical fibers generally use yellow outer sheath. In the multimode optical fiber, OM1 and OM2 are orange, OM3 and OM4 are aqua blue, and OM5 is aqua green. After understanding the color appearan...
The intelligent building network is responsible for the data transmission tasks of various building automation systems, such as lighting, air conditioning, electrical, monitoring, computers, wireless devices, etc. In this blog, ETU-LINK will introduce the networking solution of intelligent building. As the intelligent buildings are relatively dense and the business volume is relatively large,...
S port is fully called serial interface, also known as high-speed asynchronous serial port. It is mainly used when connecting router and router. You can use commands to set bandwidth. E port is an Ethernet interface, called Ethernet interface. It is mainly used to connect Ethernet (local area network), which can be connected with ordinary twisted pair. Console port is called the control port. This...
In this blog, ETU-LINK will introduce the difference between MPO and MTP connectors? First, let's learn about what MPO and MTP connectors are respectively. MPO is the abbreviation of Multi-fiber Push On. It is the first generation of multi-core optical fiber connector designed by NTT company in Japan. Its main industrial standard isIEC-61754-7, and the current national s...
The 100G QSFP28 SR4 optical module has a wavelength of 850 nm and uses a 4-channel 850 nm VCSEL laser array and a PIN photodetector array, and each channel can run at a rate of 25Gbps. The 100G QSFP28 SR4 optical module uses an MPO interface (12 cores) and has a transmission distance of 70m when used with OM3 multimode fiber and 100m when used with OM4 Multimode fiber. The 100G QSFP28 SR...
Categories
New Blog
Tags
© Copyright: 2024 ETU-Link Technology CO ., LTD All Rights Reserved.
IPv6 network supported
Friendly Links:
易天官网