• October 14. 2021

In this article, ETU-LINK will take everyone into the optical fiber cabling system, which is simply the transmission network in buildings and complexes. The integrated wiring system is a digital infrastructure built by intelligent offices, which can support integrated applications such as voice, data, graphics, and multimedia. The integrated optical fiber wiring system is divided into the followin...

• October 23. 2021

This blog ETU-LINK takes everyone to understand the difference between optical fiber, copper cable and twisted pair. First of all, let’s understand the twisted pair. The twisted pair is made up of multiple groups of insulated copper wires intertwined. The internal medium of the twisted-pair cable is also copper wire, and the internal transmission is an electrical signal. According to the principle...

• November 05. 2021

At present, MPO patch cord is widely used in high-speed and high-density data center wiring, and its quality determines the stability and sustainability of the whole data center network. So what factors should we consider when choosing MPO patch cord? Today ETU-LINK will introduce the Purchasing Guide of MPO patch cord.     1. Choose a patch cord with a small insertio...

• November 17. 2021

Optical fiber media converter is also known as optical-to-electrical converter, its function as converting the optical and electrical signal. The transmission process is roughly: the electrical signals are converted into optical signals, transmitted through optical fibers, and then the optical signals are converted into electrical signals at the other end, and then connected to routers, switches a...

• November 23. 2021

The QSFP-40/100-SRBD is a dual-rate bidirectional (BiDi) optical module. It features 40G and 100G transmission rates and dual-fiber LC interface type. It can easily help customers upgrade from 10G to 40G/100G networks using existing 10G network duplex multimode fiber architecture. In the following, ETU-LINK will introduce the relevant parameters of the QSFP-40/100-SRBD optical module and the ...

• December 02. 2021

In the 1990s and early 2000s, network cards were generally used in computers, and they were slowly used in servers and workstations until later. During this period, due to the maturity of wireless technology and the popularization of wireless networks, wireless network cards were gradually widely used on computers. However, due to the reliability of the connection, the wired network card...

• January 19. 2022

In optical fiber communication, when optical fiber transmits optical signal, the optical signal will attenuate along the optical fiber transmission path, and the transmission distance is limited by optical fiber attenuation. In order to transmit the signal further, we need to enhance the optical signal. The traditional method of enhancing the optical signal is to use the regenerator, but it has ma...

• March 02. 2022

In this blog, ETU-LINK will introduce the flame retardant grades of optical cables. The flame retardant grades of optical cables can be divided into three types, OFN, OFNR and OFNP. Before talking about flame retardant grades, you can first understand LSZH (low smoke halogen free). As early as the mid-1980s, halogen (especially brominated) flame retardant polymer systems were widely used because o...