• October 27. 2017

Network is an important part of our life ,as a network solution supplier, saving cost and energy are the two main considerate factors when deploying the data center networks. The rate of 10G SFP+ Optical Module can not meet the demand of network, but the price of 40G and 100G module is too high and the power consumption is too large, at this point, high performance and inexpensive 16/25G...

• October 23. 2017

10G optical transceiver module refers to the module that can send and receive 10G data signals per second. According to the different packaging form, 10G optical module can be divided into SFP+, XFP, X2 and XENPAK, and in these optical modules, 10G SFP+ is the most popular. So why is the 10G SFP+ optical module so popular? ETU-Link will tell you the answer now. First of all, let's learn about the ...

• October 18. 2017

40G network is more and more popular nowadays. Know the information about 40G optical transceiver module is important for you to deploy 40G Ethernet. Question: what is the maximum transmission distance supported by 40GbE? Answer: IEEE 40GBASE-X standard is described as follows: 40GBASE-SR4 transmission distance is 100m when using OM3 multimode fiber, can up to 150m when using OM4 multimode fiber. ...

• October 12. 2017

If you are the first time to buy optical transceivers, you might be confused with "DDM", "DOM" or "RGD". What are they? Today, ETU-Link will describe in detail the functions of these three types of optical modules. What is DDM? DDM means Digital Diagnostic Monitoring. It is the technique used in the optical module so that users can monitor the real-time parameters of the module. Including modules’...

• September 29. 2017

We are often confused on the compatibility of SFP and SFP+, confused that we don't know if we can use the SFP optical module in the SFP+ slot. It's a headache for many engineers, today we will focus on this problem. The SFP optical module can plug into the SFP+ port in most cases. According to experience, CWDM SFP optical transceiver can run in the SFP+ slot, but the SFP+ module cannot run in the ...

• September 15. 2017

Saving the cost is a very important and factor in a large network transmission system, especially when it needs lots of the modules,especially when it using the original modules. So then the compatible modules appeared to solve such problem. But How Can We ensure the Compatible Modules Quality When Purchasing? Today we want to share some with you: 1. Does it have the DDMI of  SFF-8472 St...

• September 11. 2017

When install a Optical fiber optic network, people may make some common mistakes, which were usually overlooked. In this blog, we will list the most common ones. Hope to give you some guidance for your optical network installation. 1.SFP BIDI transceiver must be used in pair The SFP BiDi transceiver must be matched correctly. Take an example: The paired BIDI transceivers connect with switch A and ...

• September 05. 2017

Optical transceivers may be used in switches, video surveillance, radio and television, medical equipment, etc., In these areas, we must ensure the accuracy and stability of the product. In the application of electronic products, electronic circuits need to be verified and tested one by one. In large projects and important projects, sample testing are required. Here are some of our clients' questi...

• September 01. 2017

When a customer asks us for an inquiry, we will ask the customer a question: Could you tell me the compatibility? Cisco, HUAWEI, Juniper or others? This is very important for our product! So what is the compatibility? Why is it so important? Today we will learn about it together! We all know a common sense, one key can only be opened one lock. The switch is like a lock, and the compatible cod...

• August 30. 2017

Today, ETU-Link will share the CFP2 optical module installation process with you. What preparations and attention should be made before installation? Let’s learn about it! 1. Preparation before installation To avoid the static electricity generated during installation causes damage to CFP2 optical transceiver or electronic devices in equipment. Before installing or removing the CFP2 module, please...