• November 27. 2017

Do you know 10GBASE Copper-T Module? It has stable performance, takes full advantage of Copper Cabling. Here we share some knowledge of 10GBASE Copper-T for you, hope it will help you on your work and business. 1. What is 10GBASE Copper-T? It mainly be used in the transmission of 10G Ethernet in Cat 6 or Cat7 Copper cabling systems, meets SFF-8431, SFF-8432 MSA Standard, distance up to 30M. 2. 10G...

• November 20. 2017

As we all know, the application of Optical Transceivers module is very extensive, while the GLC-T is rare. Maybe some people will think that is the performance of the optical module higher than the GLC-T caused this phenomenon. But this is wrong, GLC-T performance is also quite good, but also has unique advantages. Today we will give you a brief introduction of GLC-T in this blog. Firstly we have ...

• November 10. 2017

Do you know this type of Smart Phone as below? Yes! It's Iphone X. It's very popular these days in China, and the world. Do you have one? If not, maybe you should have one. And do you know what's ESPB2392-3LCD10? And what's the connection between Iphone X and ESPB2392-3LCD10? Now we will show you with the picture! ESPB2392-3LCD10 is the optical transceiver produced by ETU-link Techn...

• November 08. 2017

There are many kinds of 10G optical transceivers on the market such as SFP+, XFP, X2 and XENPAK. If we can interconnect SFP+, XFP, X2 and XENPAK? Some module users want to know if they can connect SFP to SFP+ or if they can connect single-mode modules to multi-mode modules. In this blog, we will list some common questions often asked by module users and give the right answer mainly based on Cisco ...

• November 06. 2017

The SFP-10G-SR is a Cisco multimode 10G SFP+ transceiver module. Usually it was used in a switch SFP slot and support on a wide range of Cisco switches and routers. In the market, the SFP-10G-SR price is various. from $10 to $800. Which one should choose? Knowledge of SFP-10G-SR price and compatibility will be provided in this blog. Knowledge of SFP-10G-SR Compatibility When you buy SFP-10G-SR tra...

• November 01. 2017

With the rapid development of information technology, the application of optical communication has become more and more popular. With the advantages of large capacity and high-speed transmission, Fiber Optic Transceiver Modules is playing a more and more important role. Where there is fiber, the optical module is needed, and the selection and purchase of the optical module has become the focus of ...

• October 27. 2017

Network is an important part of our life ,as a network solution supplier, saving cost and energy are the two main considerate factors when deploying the data center networks. The rate of 10G SFP+ Optical Module can not meet the demand of network, but the price of 40G and 100G module is too high and the power consumption is too large, at this point, high performance and inexpensive 16/25G...

• October 23. 2017

10G optical transceiver module refers to the module that can send and receive 10G data signals per second. According to the different packaging form, 10G optical module can be divided into SFP+, XFP, X2 and XENPAK, and in these optical modules, 10G SFP+ is the most popular. So why is the 10G SFP+ optical module so popular? ETU-Link will tell you the answer now. First of all, let's learn about the ...

• October 18. 2017

40G network is more and more popular nowadays. Know the information about 40G optical transceiver module is important for you to deploy 40G Ethernet. Question: what is the maximum transmission distance supported by 40GbE? Answer: IEEE 40GBASE-X standard is described as follows: 40GBASE-SR4 transmission distance is 100m when using OM3 multimode fiber, can up to 150m when using OM4 multimode fiber. ...

• October 12. 2017

If you are the first time to buy optical transceivers, you might be confused with "DDM", "DOM" or "RGD". What are they? Today, ETU-Link will describe in detail the functions of these three types of optical modules. What is DDM? DDM means Digital Diagnostic Monitoring. It is the technique used in the optical module so that users can monitor the real-time parameters of the module. Including modules’...