EPON is a passive optical network based on Ethernet, which is an important part of optical access technology. The PON network consists of OLT (optical line terminal), ODN (passive optical splitter network) and ONU (optical network terminal). Partial composition. OLT equipment is located at the core position in the network topology. It accesses multiple service networks upwards, and accesses multip...
There are four types of 10G CWDM optical modules: 10G SFP+ CWDM, 10G XFP CWDM, 10G SFP+ DWDM, and 10G XFP DWDM. Among them, the CWDM series of optical modules have an optional band of 1270-1610nm with an interval of 20nm, and the DWDM series of optical modules are optional. It is C17-C61. Next, ETU-LINK will introduce to you what 10G CWDM optical modules are available. 1、10G SFP+ CWDM se...
2020 is the first year that 5G will be commercialized. At present, 25G optical modules have also been used in the construction of 5G signal base stations. Among them, 25G CWDM optical modules have a high market prospect in 5G fronthaul. Compared with other 25G optical modules, 25G CWDM optical module can save more fiber resources, thus effectively saving the total cost of operators. As early as 20...
The 2.5G optical module adopts the SFP package form. Compared with the 1.25G SFP optical module, it has a higher speed. It conforms to the SFP MSA and synchronous optical network (SONET OC-48/SDH STM-16) standards, and has DDM Features. Below, ETU-LINK will list the 2.5G SFP Gigabit optical modules. At present, the 2.5G optical modules supplied by ETU-LINK are divided into three types: single fibe...
The 2.5G SFP dual fiber optical module is a full-duplex transceiver module with a maximum rate of 2.67Gbps. The operating temperature range is commercial grade (0℃-70℃), extended grade (-20℃-85℃), and industrial grade. (-40℃-85℃) optional. 2.5G SFP dual-fiber series optical modules comply with SFP MSA and synchronous optical network (SONET OC-48 / SDH STM-16) standards, and are compatible with Gig...
The 50G SFP56 SR optical module is an optical module with a transmission distance of 100m and a maximum rate of 53.125Gbps. The transmission distance can be up to 70m or 100m through OM3 or OM4 multimode optical fiber. It is widely used in 50GBASE-SR Ethernet links. ETU-LINK's 50G SFP56 SR optical module uses PAM4 high-order modulation technology, which can transmit twice the am...
With the increasing demand of data center for bandwidth, the network rate is developing towards a higher rate, and there is bound to be the need for network upgrading. There are two upgrade paths for the network from 10G to 100G, namely 10G-25G-100G and 10G-40G-100G. End users seem to prefer 25G. Why? ETU-LINK will tell you. All this can be said from the rise of 25 Ethernet. Data center TOR...
SFP, SFP+, SFP28, QSFP+ and QSFP28 are the packaging types of optical modules. These hot-swappable optical modules can be used to connect network switches and other network devices (such as servers, etc.) for data transmission. Before clarifying the difference between these package types, you need to understand what the SFP, SFP+, SFP28, QSFP and QSFP28 packages are. Next ETU-LINK w...
Categories
New Blog
Tags
© Copyright: 2024 ETU-Link Technology CO ., LTD All Rights Reserved.
IPv6 network supported
Friendly Links:
易天官网