• June 15. 2018

Those days, so many customers asked us about the Copper-T RJ45 modules, Some asked for the goods, some need the problem supports. Now let us share some with you, hope it can be helpful for you to enhance you market. 1. Which Copper-T can have in the market ? For the Copper-T RJ45 types, pls check : No. Types 1 10/100M SFP Copper-T RJ45 100m 2 10/100/1000M SFP Copper-T...

• June 19. 2018

It seems that 25GbE is more preferred and accepted by end users, compare with 10GbE and 40GbE. 1.Why Choose 25GbE? While 10GbE is fine, it cannot efficiently for the next-generation Clould and web-scale environments. And 40GbE, isn't cost-effective or power-efficient. So, that's why we need 25GbE. 2.The Cost of 25GbE Wiring Is Lower 40GbE has to be cooperated with MPO fiber to transmit, it would c...

• July 06. 2018

Recently, several new colleagues came into sales department. Sales is the core department of a company. The economic lifeline could be deeply influenced by sales. If you want to sell your product, you need to be familiar with the product. Let's start with a simple thing -- naming rules for optical modules. If you don't know the product model, how can you communic...

• July 12. 2018

As we all know, currently the mainstream optical communication transmission rate is 40G and 100G on the market, their competition is also fierce. Today we will list some common questions in 40G networks. What are the common solutions for 40G networks? At the core of the 40G network layer, a pair of optical modules are usually connected at both ends of a multimode optical fiber such as OM3 or OM4(M...

• July 17. 2018

With the development of the networks, upgrading the 10G to 40G networks is the requirement of networks, But there is a very largest problem to build the cable system when upgrading, especially the short distance transmission of 40G. So in order to solve this problem, 40G QSFP+ SR4 BIDI modules produced by engineers... And today, we will introduce this to you , and hope it can be helpful ...

• July 19. 2018

QSFP+ have Single-mode and multimode, it means QSFP+ optical module works on different types of fiber optic, the single-mode QSFP + use with single mode fiber, and the multimode QSFP + used with multimode fiber. Then what are the differences between them? Where are they applied? What should we pay attention to when we use them? In this article, we will discuss this topic. Optical module difference...

• August 13. 2018

Nowadays, large data centers and networks tend to provide multiple Ethernet interface speeds, including 10Gbps, 40Gbps, and 100Gbps. Based on this, Arista 7500R series switches are introduced, which greatly increased the flexibility and scalability of data center cabling, and it has been widely favored by people. Arista 7500R series modular switches can provide the highest performance in the indus...

• September 21. 2018

100G has a variety of packaging forms, including CFP/CFP2/CFP4, CXP and QSFP28. Among these different 100G packaging forms, QSFP28 optical module has the advantages of high port density, low power consumption and low cost, so it has become the main packaging form of 100G network. Therefore, we will focus on four types of 100G QSFP28 optical modules today. 1.100GBASE-SR4 QSFP28 optical transce...