As data centers and telecom operators require higher transmission rates for optical modules, what technologies do optical module manufacturers use to achieve higher transmission rates? This article ETU-LINK will reveal the answer for you. 1. Increase the baud rate. The baud rate refers to the modulation rate of the data signal to the carrier. This method is mostly used for low rate optical modules...
In this blog, ETU-LINK will talk about the 50G SFP56 SR optical module using PAM4 modulation technology. Since the PAM4 signal has four level values, the PAM4 signal can be used in the same physical bandwidth of the channel. Downlink transmission is twice the amount of information compared to NRZ signals, enabling single-channel 50G applications. Therefore, PAM4 signal modulation has become t...
It is believed that everyone should be very familiar with the packaging of optical modules after reading the previous articles of ETU-LINK. So how much do you know about the packaging of optical components in optical modules? In this article, ETU-LINK will take you to understand the packaging process of optical devices. At present, the common optical device packages include Box, COB, TO-CAN...
This blog ETU -LINK will take you to read what is WDM, before that we first to get to know why the WDM technology, it appears from the background of the Internet, development rapidly in a short few decades, so operators urgently needs a lot of network capacity to meet growing customer service requirements. For network expansion, simply increase the transmission capacity linearly by increasi...
As networks grow in size, we are seeing a shift from the traditional three-layer network architecture to a flatter, wider Spine-Leaf architecture. Most modern e-commerce, social media and cloud applications use distributed computing to serve their customers. Distributed computing means that servers speak to servers and work in parallel to create dynamic web pages and answer customer question...
Usually, the ports of the newly purchased optical modules are clean, and there is no need to clean the ports, but for the optical modules that are idle or have not been inserted into the dust cap in time, when they are used again, in order to prevent the transmission performance from being affected, we still have It is necessary to clean the port of the optical module first. Then the following ETU...
The RG-S6250 series switches are a new generation of high-performance, high-density 10 Gigabit switches launched by Ruijie Networks for cloud data centers and high-end campuses. This series of switches supports 48 10G ports and 8 100G ports, and each 100GE port can adapt to 100G and 40G. Next, ETU-LINK will introduce the common specifications of products such as optical modules, active optical cab...
With the rapid development of cloud computing, big data and Ethernet, operators upgrade their data centers to a higher data rate, which further increases the demand for 100G. The pattern is also shifting from 100G. The 100G QSFP28 ZR4 is also the product of this era of big data.This article is mainly about the introduction of 100G QSFP28 ZR4 optical module products brought by ETU-Link. ...
Categories
New Blog
Tags
© Copyright: 2024 ETU-Link Technology CO ., LTD All Rights Reserved.
IPv6 network supported
Friendly Links:
易天官网