Optical Transceiver
Search
Home Search

  • Introduction and usage of CVR-QSFP-SFP10G converter module
    Introduction and usage of CVR-QSFP-SFP10G converter module
    • May 18. 2021

    With the advent of 40G Ethernet, many enterprise users have begun to take full advantage of current 10G network equipment to upgrade to 40G networks. However, when high-speed switches and low-speed switches are interconnected, we will encounter the problem of insufficient SFP+ ports. At this time, we can use Yitian CVR-QSFP-SFP10G converter module to convert QSFP+ ports to SFP+ ports, an...

  • The difference between multimode fiber OM3-150 and OM3-300
    The difference between multimode fiber OM3-150 and OM3-300
    • May 21. 2021

    The OM3 patch cord is a 10-Gigabit multi-mode patch cord. The multi-mode fiber uses light-emitting diodes as the light source, allowing multiple beams of light to propagate in the fiber at the same time, thereby forming a mode dispersion. Mode dispersion technology limits the bandwidth and distance of multimode fiber. Therefore, the core wire of multimode fiber is thick, the transmission speed is ...

  • AEC active cable -- the substitute of DAC high speed cable and AOC active cable?
    AEC active cable -- the substitute of DAC high speed cable and AOC active cable?
    • July 01. 2021

    We all know AOC active optical cables, but have you heard of AEC active cables? Today, ETU-LINK will introduce to you what is AEC active cable and what are its advantages?     The AEC active cable is issued by the HiWire Alliance, and the HiWire AEC specification defines the standard for basic electrical and mechanical specifications. AEC active cable supports transmission rates of 100G,...

  • Interconnection solution between Huawei 10 Gigabit switch and Intel Network Card
    Interconnection solution between Huawei 10 Gigabit switch and Intel Network Card
    • July 03. 2021

    Today, ETU-LINK will introduce the connection scheme of Huawei 10 megabyte switch and 10 megabyte network card. First, we will understand the port type and optical port type of the ten megabyte network card equipped by Huawei wantrillion switch. Huawei's 10 megabyte access network switch is equipped with down line 10G SFP+ port, which is mainly connected to the access of the ten thousand megabyte ...

  • Choose high-speed cable or active optical cable for data center?
    Choose high-speed cable or active optical cable for data center?
    • July 06. 2021

    High speed cable and active optical cable are commonly used short-distance interconnection products in data center and enterprise computer room, but they have their own advantages and disadvantages. In this article, ETU-LINK will show you how to choose high-speed cable and active optical cable in data center computer room and how to compare their advantages?   First of all, let's ta...

  • Active cable ACC—Enhanced version of DAC high-speed cable
    Active cable ACC—Enhanced version of DAC high-speed cable
    • July 21. 2021

    As we all know, DAC active cable is mainly used for interconnection between cabinets. Due to the limitation of passive copper cable DAC transmission distance due to material, high frequency loss of connector and other factors, the maximum length of passive copper cable DAC with transmission rate of 10G/25G can only reach 7m, and the maximum length of passive copper cable DAC with transmission rate...

  • The difference and purchase of network management switch and non network management switch
    The difference and purchase of network management switch and non network management switch
    • July 23. 2021

    In this article, ETU-LINK will take you to talk about network management switches and non network management switches. With the development of the network, the demand for switches is also increasing. Many switch parameters will be written with network management switches or non network management switches. What is the difference between the two?   The non network management switch is also kno...

  • How do interconnect a switch 40G QSFP+ port with a 10G SFP+ port?
    How do interconnect a switch 40G QSFP+ port with a 10G SFP+ port?
    • August 10. 2021

    With the advent of 40G Ethernet, many enterprise users have begun to take full advantage of current 10G network equipment to upgrade to 40G networks. In other words, this involves the use of 40G switches with QSFP+ ports and existing 10G devices (switches and servers) with SFP+ ports. In this article, ETU-LINK will share three common solutions and teach you how to interconnect the switch 40G QSFP+...

    A total of

    9

    pages

© Copyright: 2024 ETU-Link Technology CO ., LTD All Rights Reserved.

IPv6 network supported

Friendly Links:

易天官网
top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #