• October 27. 2023

What is a Media converter? Do you understand its applications and features? Today, ETULINK will take you to understand what a Media converter is. Media converter is a communication device that converts short-distance Ethernet electrical signals and long-distance optical signals into each other, ensuring smooth transmission of data packets between two networks. It has two ports, one end is an optic...

• October 18. 2023

As a network solution provider, energy conservation and cost are two important factors to consider when deploying data center networks. CWDM (Coarse Wave Division Multiplexing), as a low-cost WDM transmission technology for metropolitan area network access layer, is favored by market users. Today ETU-LINK will take you to learn the 16G CWDM SFP+ optical module. Feature Ø Supports up to 14.025...

• July 28. 2023

As an important component of optical communication systems, the quality of fiber optic jumpers' connectors determines the transmission quality of the network. The function of the connector is to precisely connect the two separated fiber end faces, so that the optical energy output by the transmitting fiber can be coupled to the receiving fiber to the maximum extent. Optical fiber connectors i...

• June 28. 2023

The RG-S6920-4C switch is a new generation of high-performance, high-density card-type switches launched by Ruijie Networks for the development trend of AI and other applications.The RG-S6920-4C switch cooperates with the RGS6510 and RG-S6250 series TOR switches to meet the full three-layer network architecture design requirements of Spine-Leaf. The RG-S6920-4C switch is configured with 32 100G QS...

• May 31. 2023

In this blog, ETU-LINK will introduce the QSFP-100G-ER4 Lite optical module, which uses LWDM multiplexing technology and operates in the wavelength range of 1295, 1300, 1304, and 1309. The optical signal is multiplexed by a WDM wavelength division multiplexer and transmitted on a single-mode fiber through an industry-standard LC connector. At the receiving end, the SOA amplifies the signal before ...

• May 27. 2023

Recently, 400G Ethernet has become a hot topic in the communication industry. It is both an outlet and a challenge. Network equipment manufacturers have launched 400G switches, and optical communication products have also launched 400G optical modules. In this article, ETU-LINK is about the impact of the emergence of 400G switches and 400G optical modules on data centers.   First of all,...

• May 26. 2023

Media converter are Ethernet transmission conversion units that convert electrical signals and optical signals to each other, so they are also called photoelectric converters. The main purpose of using Media converter is to extend the transmission distance of the signal. Since the twisted pair wires used in our daily life, that is, network cables, have a very limited transmission distance, if...

• May 23. 2023

Multimode fiber has been developed from OM1 to OM5 now, so which one is better among OM2, OM3, and OM4 multimode fiber? In this blog, ETU-LINK will explain to you.   Multimode fiber is mainly used for optical transmission with a wavelength of 850nm. Here, the two points of effective mode bandwidth and full injection bandwidth can be compared separately. First, let us understand what bandwidth...

• May 19. 2023

The previous storage technology only uses the storage device as an auxiliary device of the server. The large-capacity data exchange between servers can only rely on traditional networks, and cannot adapt to the development of IT technology in terms of speed, security, cross-platform sharing, and unlimited expansion. Under such circumstances, SAN technology came into being. fiber Channel SCSI ...

• May 16. 2023

Before understanding the differences between single mode and multimode, we need to know that light propagates in a fiber as a set of independent beams, which propagate at a specific angle to the fiber axis and are called modes. We can distinguish between single mode and multimode by transmission mode. Single mode fiber supports one mode, while multimode fiber supports multiple modes. Below, ETU-LI...