• August 24. 2018

As we all know, the 40G SR4 QSFP+ optical module is the ideal solution for short-range interconnection in 40G networks and has many advantages, but the 40G QSFP+ AOC also has similar function of optical module and is not inferior to the 40G SR4 QSFP+ module or even can replace it to transmit signals. Since both can be 40G short-distance interconnection, then what are the differences between them? ...

• September 21. 2018

100G has a variety of packaging forms, including CFP/CFP2/CFP4, CXP and QSFP28. Among these different 100G packaging forms, QSFP28 optical module has the advantages of high port density, low power consumption and low cost, so it has become the main packaging form of 100G network. Therefore, we will focus on four types of 100G QSFP28 optical modules today. 1.100GBASE-SR4 QSFP28 optical transce...

• August 08. 2018

Today let's learn about the MPO Patch cord. Last time one of our customer bought 100G SR4 MPO 100M, compatible with Juniper QFX5110 Switch.   1.How to connect the 2 transceivers in 2 switches with a patch cord directly? It's a question for him. So I gave him a solution, like the following picture shows. ①we imagine you use Juniper QFX5110-32Q to test the modules. ②100G SR4 MPO ...

• July 30. 2018

EPON and GPON are the two main members of optical network access. Each of them has own advantages, competes and complements each other.The following will compare with them in various aspects. Data Rate EPON provides a fixed up and downlink with 1.25 Gbps, using 8b/10b line coding, and real rate is 1Gbps. GPON supports a variety of speed grades, can support uplink and downlink asymmetric rates, dow...

• July 19. 2018

QSFP+ have Single-mode and multimode, it means QSFP+ optical module works on different types of fiber optic, the single-mode QSFP + use with single mode fiber, and the multimode QSFP + used with multimode fiber. Then what are the differences between them? Where are they applied? What should we pay attention to when we use them? In this article, we will discuss this topic. Optical module difference...

• July 17. 2018

With the development of the networks, upgrading the 10G to 40G networks is the requirement of networks, But there is a very largest problem to build the cable system when upgrading, especially the short distance transmission of 40G. So in order to solve this problem, 40G QSFP+ SR4 BIDI modules produced by engineers... And today, we will introduce this to you , and hope it can be helpful ...

• July 12. 2018

As we all know, currently the mainstream optical communication transmission rate is 40G and 100G on the market, their competition is also fierce. Today we will list some common questions in 40G networks. What are the common solutions for 40G networks? At the core of the 40G network layer, a pair of optical modules are usually connected at both ends of a multimode optical fiber such as OM3 or OM4(M...

• June 19. 2018

It seems that 25GbE is more preferred and accepted by end users, compare with 10GbE and 40GbE. 1.Why Choose 25GbE? While 10GbE is fine, it cannot efficiently for the next-generation Clould and web-scale environments. And 40GbE, isn't cost-effective or power-efficient. So, that's why we need 25GbE. 2.The Cost of 25GbE Wiring Is Lower 40GbE has to be cooperated with MPO fiber to transmit, it would c...

• June 15. 2018

Those days, so many customers asked us about the Copper-T RJ45 modules, Some asked for the goods, some need the problem supports. Now let us share some with you, hope it can be helpful for you to enhance you market. 1. Which Copper-T can have in the market ? For the Copper-T RJ45 types, pls check : No. Types 1 10/100M SFP Copper-T RJ45 100m 2 10/100/1000M SFP Copper-T...

• June 14. 2018

Today we will introduce some basic knowledge about GPON SFP optical transceivers. GPON is one of the key technologies that are being used in fiber-based (FTTx) access networks, including fiber to the home (FTTH), fiber to the business (FTTB), fiber to the curb...