• August 24. 2019

At present, WDM (Wavelength Division Multiplexing) technology is developing very rapidly, and has shown great vitality and bright prospects for development. Optical wavelength division multiplexing (WDM) is a technology that allows two or more optical wavelength signals to transmit information through different optical channels at the same time in the same optical fiber. Optical wavelength divisio...

• August 20. 2019

With the advent of the 5th generation (5G) communication, 100G is becoming more and more familiar to us, but we really know 100G optical module? Compared with the 100G CFP4 optical module and the 100G QSFP28 optical module, which packaging has more advantage?More popular?Today we will compare and analyze them in detail. QSFP28 optical module QSFP28 optical module belongs to a kind of 100G optical ...

• August 13. 2019

The entrance of the optical fiber greatly satisfies the user's demand for the network. The optical module can realize photoelectric conversion for optical communication network, and the transmitting end converts the electrical signal into an optical signal. After transmitting through the optical fiber, the receiving end converts the optical signal into an electrical signal. When choosing an optica...

• July 27. 2019

EPON and GPON are the two main members of optical network access. Each of them has own advantages, competes and complements each other.The following will compare with them in various aspects. Data Rate EPON provides a fixed up and downlink with 1.25 Gbps, using 8b/10b line coding, and real rate is 1Gbps. GPON supports a variety of speed grades, can support uplink and downlink asymmetric rates, dow...

• July 23. 2019

With the transmission rate of optical transmission equipment increases and the degree of integration increases, the circuit board of high-speed transmission equipment is also more and more sensitive to static electricity.There are two main types of optical transmission:optical transceiver and high speed digital circuit. In our daily life, we can see the small static electricity, the static electri...

• July 18. 2019

As people's requirements for the network,it is getting higher and higher, 100G networks have been rapidly developed, and 100G optical transceiver is becoming more and more popular. Currently, there are several types of packages: CFP/CFP2/CFP4, CXP and QSFP28, especially QSFP28 optical transceiver is more common. In addition to the 100G optical transceiver defined by the IEEE standard, the Multi-So...

• July 05. 2019

With the rapid development of information technology, the application of optical communication has become more and more popular. With the advantages of large capacity and high-speed transmission, optical fiber is playing a more and more important role. Where there is fiber, the optical module is needed, and the selection and purchase of the optical module has become the focus of the front-line eng...

• June 28. 2019

10GBASE-T SFP+ Copper RJ45 module also known as optical port switching electrical port module, photoelectric conversion module, it is a hot-plugging module, adopts SFP+ packaging form, RJ45 connector, transmission rate is 10G, the transmission distance can reach 30m, its port supports shielded twisted pair, and can support unshielded twisted pair. The 10GBASE-T SFP+ Copper RJ45 module complies wit...

• June 26. 2019

Optical modules are an integral part of all network connectivity deployments. As a sales of optical transceiver should know that the working temperature will influence the parameters of the optical transceiver. When the applied environment temperature of the module is changed, then the working current will change as the temperature changes. At the same time, it will lead to changes in the paramete...

• June 17. 2019

This article gives you two main points, about the X2 to 10G SFP+ optical module connection solution and the X2 module and SFP+ module direct connection solution. Now let's take a look at the following solution with ETU-Link: The X2 to 10G SFP+ optical module connection solution Required equipment: ①X2 optical module ②X2 to SFP+ converter ③10G SFP+ optical module ④patch cord Solution 1 One end uses...