Optical Transceiver
Optical Transceivers Introduction
Home Optical Transceivers Introduction

Optical Transceivers Introduction

  • What are the differences between MPO and MTP connectors?
    What are the differences between MPO and MTP connectors?
    • March 30. 2022

    In this blog, ETU-LINK will introduce the difference between MPO and MTP connectors? First, let's learn about what MPO and MTP connectors are respectively.   MPO is the abbreviation of Multi-fiber Push On. It is the first generation of multi-core optical fiber connector designed by NTT company in Japan. Its main industrial standard isIEC-61754-7, and the current national s...

  • Three application scenarios of POE optical fiber media converter
    Three application scenarios of POE optical fiber media converter
    • March 29. 2022

    POE optical fiber media converter is one of the common equipment to build enterprise POE network architecture. It can use the existing unshielded twisted pair wiring to power the network equipment. In this article, ETU-LINK will introduce you the application scenarios of POE optical fiber media converter? Poe optical media converter is a photoelectric converter with power over Ethernet (POE) funct...

  • What are the advantages of the 10G SFP+ CWDM optical transceiver?
    What are the advantages of the 10G SFP+ CWDM optical transceiver?
    • March 24. 2022

    In this blog, ETU-LINK will introduce what is 10G SFP+ CWDM optical transceiver, and what are its advantages. 10G SFP+ CWDM optical transceiver is a kind of coarse wavelength division multiplexing optical transceiver, usually used with single mode optical fiber. This kind of optical transceiver uses the CWDM technology to save optical fiber resources, which significantly improves networking f...

  • What do the G port, F port, E port and S port of the switch mean?
    What do the G port, F port, E port and S port of the switch mean?
    • March 19. 2022

    S port is fully called serial interface, also known as high-speed asynchronous serial port. It is mainly used when connecting router and router. You can use commands to set bandwidth. E port is an Ethernet interface, called Ethernet interface. It is mainly used to connect Ethernet (local area network), which can be connected with ordinary twisted pair. Console port is called the control port. This...

  • Intelligent Building Networking Solution
    Intelligent Building Networking Solution
    • March 17. 2022

    The intelligent building network is responsible for the data transmission tasks of various building automation systems, such as lighting, air conditioning, electrical, monitoring, computers, wireless devices, etc. In this blog, ETU-LINK will introduce the networking solution of intelligent building. As the intelligent buildings are relatively dense and the business volume is relatively large,...

  • Which optical modules are commonly used in 4G base stations?
    Which optical modules are commonly used in 4G base stations?
    • March 15. 2022

    In this blog, ETU-LINK will talk about 4G base stations and common types of optical modules. The base station can be divided into two modules: the RRU for transmitting signals and the BBU for processing signals. The BBU is small and exquisite, with low power consumption, while the RRU is large and has high power consumption. Because the base station is divided into two parts to work sepa...

  • What are the advantages of OM5 optical fiber patch cord?
    What are the advantages of OM5 optical fiber patch cord?
    • March 10. 2022

    In this blog, ETU-Link will introduce OM5 optical fiber patch cord. In order to distinguish different optical fiber patch cord, different colors outer sheath are used.For non-military purposes, single mode optical fibers generally use yellow outer sheath. In the multimode optical fiber, OM1 and OM2 are orange, OM3 and OM4 are aqua blue, and OM5 is aqua green. After understanding the color appearan...

  • How many models for 25G SFP28?
    How many models for 25G SFP28?
    • March 04. 2022

    25G optical module is an optical module with a transmission rate of 25Gbps, which is mainly used in 25G Ethernet and 100g (4×25Gbps) Ethernet. Encapsulated as SFP28, its function is to interconnect servers and switches in the data center. With the rapid development of the Internet, cloud computing and big data, the construction of IT infrastructure data centers is further accelerated, among which ...

  • What do the flame retardant grades OFNP, OFNR and LSZH of optical fiber patch cords stand for?
    What do the flame retardant grades OFNP, OFNR and LSZH of optical fiber patch cords stand for?
    • March 02. 2022

    In this blog, ETU-LINK will introduce the flame retardant grades of optical cables. The flame retardant grades of optical cables can be divided into three types, OFN, OFNR and OFNP. Before talking about flame retardant grades, you can first understand LSZH (low smoke halogen free). As early as the mid-1980s, halogen (especially brominated) flame retardant polymer systems were widely used because o...

  • 40G QSFP+ Optical Module introduction
    40G QSFP+ Optical Module introduction
    • February 23. 2022

    Cloud computing and big data are booming in my country. In order to provide enough bandwidth, many access switches have been developed to aggregation/core switches that can connect to 40G Ethernet. 40G networks have been widely used in data centers, and optical modules are one of the indispensable components for data center equipment interconnection, so ETU-LINK will give you an inventory of the t...

© Copyright: 2024 ETU-Link Technology CO ., LTD All Rights Reserved.

IPv6 network supported

Friendly Links:

易天官网
top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #