Optical Transceiver
Search
Home Search

  • Introduction about 40G QSFP+ SR4 BIDI modules
    Introduction about 40G QSFP+ SR4 BIDI modules
    • July 17. 2018

    With the development of the networks, upgrading the 10G to 40G networks is the requirement of networks, But there is a very largest problem to build the cable system when upgrading, especially the short distance transmission of 40G. So in order to solve this problem, 40G QSFP+ SR4 BIDI modules produced by engineers... And today, we will introduce this to you , and hope it can be helpful ...

  • What are the differences between singlemode QSFP+ and multimode QSFP+
    What are the differences between singlemode QSFP+ and multimode QSFP+
    • July 19. 2018

    QSFP+ have Single-mode and multimode, it means QSFP+ optical module works on different types of fiber optic, the single-mode QSFP + use with single mode fiber, and the multimode QSFP + used with multimode fiber. Then what are the differences between them? Where are they applied? What should we pay attention to when we use them? In this article, we will discuss this topic. Optical module difference...

  • Introduction of common 100G QSFP28 optical modules
    Introduction of common 100G QSFP28 optical modules
    • September 21. 2018

    100G has a variety of packaging forms, including CFP/CFP2/CFP4, CXP and QSFP28. Among these different 100G packaging forms, QSFP28 optical module has the advantages of high port density, low power consumption and low cost, so it has become the main packaging form of 100G network. Therefore, we will focus on four types of 100G QSFP28 optical modules today. 1.100GBASE-SR4 QSFP28 optical transce...

  • 40G QSFP + AOC cable VS 40G SR4 QSFP + optical module
    40G QSFP + AOC cable VS 40G SR4 QSFP + optical module
    • August 24. 2018

    As we all know, the 40G SR4 QSFP+ optical module is the ideal solution for short-range interconnection in 40G networks and has many advantages, but the 40G QSFP+ AOC also has similar function of optical module and is not inferior to the 40G SR4 QSFP+ module or even can replace it to transmit signals. Since both can be 40G short-distance interconnection, then what are the differences between them? ...

  • Brief analysis of DAC cable
    Brief analysis of DAC cable
    • August 31. 2018

    Direct attach cable is a communication equipment connection cable. It is commonly used to realize short distance high-speed interconnected communication. It is mainly used to realize the interconnection between servers, switches, memory and other devices. It is a low-cost high speed data communication solution. The common wire specifications are 24AWG, 28AWG and 30AWG, which can meet a variety of ...

  • The choice for big data era——40G QSFP+ AOC
    The choice for big data era——40G QSFP+ AOC
    • November 07. 2018

    AOC stands for Active Optical Cable, realize photoelectric conversion and transmission by the optical transceiver at both ends. 40G QSFP+ AOC is one of the most popular Active Optical Cables on the market. Why is it develop so fast? What advantages does it have? Today, ETU-Link will introduce 40G QSFP+ AOC to everyone. What is 40G QSFP+ AOC? 40G QSFP+ AOC is the core component for realizing parall...

  • How to connect the MPO optical module with LC optical module?
    How to connect the MPO optical module with LC optical module?
    • December 13. 2018

    At present, there are usually two types of optical modules in the market, MPO and LC. For two optical modules with the same interface, MPO patch cord or LC patch cord can basically realize the connection between them. For the optical modules of different interfaces, In addition to using MPO trunk fiber patch cords and LC duplex fiber patch cords, other fiber-optic cabling products such as fiber op...

  • 40G QSFP+ SR4 wiring solution
    40G QSFP+ SR4 wiring solution
    • January 29. 2019

    Nowadays, 40G network has gradually developed into a backbone network for long-distance network transmission applications. It is widely used in 40G short distance network transmission. Because 40G network wiring is more difficult than 10G, need more patch cords and space. To know how it works is very important. Today here we will introduce some high density QSFP+ SR4 optical module wiring methods....

    A total of

    21

    pages

© Copyright: 2024 ETU-Link Technology CO ., LTD All Rights Reserved.

IPv6 network supported

Friendly Links:

易天官网
top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #