Optical Transceiver
Optical Transceivers Introduction
Home Optical Transceivers Introduction

Optical Transceivers Introduction

  • Differences Between SFP and BiDi SFP
    Differences Between SFP and BiDi SFP
    • June 24. 2016

    As we learned, a common SFP transceiver is generally with two ports, one is TX port to transmit the signal, and the other one is RX port to receive signals. BiDi SFP transceiver is only with one port which uses an integral WDM coupler to transmit and receive signals over a single strand fiber. SFP and BiDi SFP Connection Methods All SFP transceivers must be used by pairs. For common SFPs...

  • The difference between CWDM and DWDM
    The difference between CWDM and DWDM
    • June 23. 2016

    With the development of the optical communication industry,new technology and cost-saving solutions are derived.Such as the widely used of CWDM and DWD.Today we learned about CWDM and DWDM. CWDM is a low-cost WDM transmission technology face to the access layer of metropolitan area network.Saving fiber resources and networking cost.It solves two problems:1.The shortage of optical fiber; 2.Multiser...

  • The difference between multimode and single-mode SFP
    The difference between multimode and single-mode SFP
    • August 23. 2017

    Some customers want to know about the difference between multimode and single mode SFP , so we summarize some information about multimode and single-mode.The following is some concepts and the differences between multimode and single-mode SFP. According to the wavelength,there are 850nm / 1310nm / 1550nm / 1490nm / 1530nm / 1610nm.850nm wavelength is fit for multimode SFP, transmission distance is...

  • Focus on 25G module market
    Focus on 25G module market
    • June 20. 2016

    With the rapid development of optical communication, most of manufacturers devote to 25G switch. Eg: HUAWEI CE8860---the industry's first 25GE access TOR switch.CloudEngine 8860(CE8860)series switch is a new high-performance, high-density, low-latency flexible card Ethernet switch. CE8860 switches provide high-density 100GE/40GE/25GE/10GE ports, support data center characteristics and high-perform...

  • The comparison between ETU and other optical transceivers
    The comparison between ETU and other optical transceivers
    • June 20. 2016

    ETU VS Others As the customers’ communication, some times we met two frequently questions: 1. What are the advantages? 2. Why choose us? In order to make the answer easily to get, the answer as below: ETU VS Others : A. PCBA design: Our PCBA passed ROHS and UL (94V-0) certification,few people will make the mark. The engineers come from the CISCO OEM partner, he strictly request the supplier to pri...

  • The Difference Between SFP+ And SFP、XFP
    The Difference Between SFP+ And SFP、XFP
    • June 20. 2016

    In order to make the people learn the difference between SFP+ and SFP、XFP, and avoid unnecessary trouble to the customer, so we share some information for them . 10G optical module has experienced the development from 300Pin, XENPAK, X2, XFP, finally realize the transmission of 10G signal with the same size as SFP, this is SFP+. SFP+ meets the requirements of the equipment to optical module high-d...

  • How To Chose The Good Optical Ttransceiver?
    How To Chose The Good Optical Ttransceiver?
    • April 29. 2016

    With the development of optical telecom market, more and more customers begin to pay attention to the stability and reliability of the optical transceiver . There are three kinds of optical transceivers on the market now: * Original optical transceiver * Second-hand optical transceiver * Compatible optical transceiver As we know, the price of the original optical transceiver is rather expensive, m...

  • The Industry Optical Transceiver
    The Industry Optical Transceiver
    • March 18. 2017

    As a sales of optical transceiver should know that the working temperature will influence the parameters of the optical transceiver.When the applied environment temperature of the module is changed, then the working current will change as the temperature changes. At the same time, it will lead to changes in the parameters of the optical transceiver.Thus affecting the normal transmission of the opt...

  • An Introduction Of SFP Transceivers
    An Introduction Of SFP Transceivers
    • March 12. 2016

    The small form-factor pluggable (SFP) is a compact, hot-pluggable transceiver used for both telecommunication and data communications applications. The SFP transceiver contains a PCB that mates with the SFP electrical connector in the host system. The form factor and electrical interface are specified by a multi-source agreement (MSA). It...

  • Definition Of Wavelength Division Multiplexing
    Definition Of Wavelength Division Multiplexing
    • March 14. 2016

    With the optical fiber application develop, the CWDM and DWDM was designed in the optical network . The early fiber optic transmission systems put information onto strands of glass through simple pulses of light. A light was flashed on and off to represent the “ones” and “zeros” of digital information. The actual light could be of almost any wavelength (also known as color or frequency) from rough...

© Copyright: 2024 ETU-Link Technology CO ., LTD All Rights Reserved.

IPv6 network supported

Friendly Links:

易天官网
top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #