When 10G network can not meet the increasing demand of the network, 40G network is more and more popular. With the continuous development, 40G Ethernet deployment has been accepted by more and more users. So do you know what factors should be considered when deploying 40G Ethernet? ETU-Link will solve the doubts for everyone! Compared with the deployment of 10G networks, 40G is a bit more complex ...
40G network is more and more popular nowadays. Know the information about 40G optical transceiver module is important for you to deploy 40G Ethernet. Question: what is the maximum transmission distance supported by 40GbE? Answer: IEEE 40GBASE-X standard is described as follows: 40GBASE-SR4 transmission distance is 100m when using OM3 multimode fiber, can up to 150m when using OM4 multimode fiber. ...
With the development of the technology and people's requirements, Higher speed transmission is needed for everything, especially for the data center. But how to set up this high density data center optical cable system? Which need us to prepare? Today, we will give an answer to you, wish it can be helpful for you! 1. Which solution and why will the data center use? Most High density data center op...
Direct attach cable is a communication equipment connection cable. It is commonly used to realize short distance high-speed interconnected communication. It is mainly used to realize the interconnection between servers, switches, memory and other devices. It is a low-cost high speed data communication solution. The common wire specifications are 24AWG, 28AWG and 30AWG, which can meet a variety of ...
40G QSFP+ optical transceiver greatly meets the market demand for high - density high - speed pluggable solutions. Now, 40G networks are already very common in most data centers, and optical modules are one of the essential components of the data center device interconnection. So how much do you know about the 40G QSFP+ optical module? What are the interfaces of the 40G QSFP+ optical module? Where...
Compared with the optical module, the biggest advantage of the Direct Attach Cable is the cost saving. As the 40G network is becoming more and more popular, the 40G QSFP+ DAC is getting more and more attention. From the type of cable, QSFP+ cable can be divided into QSFP+ DAC cable and QSFP+ AOC cable. Among them, QSFP+ DAC cable can also be subdivided into QSFP+ passive DAC cable and QSFP+ active...
With the rapid development of 40G Ethernet, the 40G optical mode is becoming more and more popular. Now we usually use the 40G QSFP+ optical module. This optical module can be divided into three types. Do you know what are the difference between them? Let’s learn about it! Three types of 40G QSFP+ optical modules: QSFP-40G-SR4, QSFP-40G-LR4 and 40G LR4 PSM. QSFP-40G-SR4 module: Generally used with...
As we all know, currently the mainstream optical communication transmission rate is 40G and 100G on the market, their competition is also fierce. Today we will list some common questions in 40G networks. What are the common solutions for 40G networks? At the core of the 40G network layer, a pair of optical modules are usually connected at both ends of a multimode optical fiber such as OM3 or OM4(M...
Categories
New Blog
Tags
© Copyright: 2024 ETU-Link Technology CO ., LTD All Rights Reserved.
IPv6 network supported
Friendly Links:
易天官网